Examples - Cisco ASR 9000 Getting Started Manual

Chapter 3 Configuring General Router Features
Table 3-5
Command
commit comment line
commit confirmed
seconds
commit label line
commit force
commit replace

Examples

The following examples illustrate how to commit a configuration:
•
•
OL-17502-01
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
Commit Command Options (continued)
Description
(Optional) Assigns a comment to a commit.
•
•
•
(Optional) Commits the configuration in global configuration mode on a
trial basis for a minimum of 30 seconds and a maximum of 300 seconds
(5 minutes).
•
•
(Optional) Assigns a meaningful label. This label appears in the output
for the show configuration commit list [detail] command instead of the
numeric label.
•
(Optional) Merges the target configuration with the running
configuration and allows a configuration commit in low-memory
conditions.
A low-memory warning occurs when a user attempts to commit a target
configuration that exceeds the default capacity of the router.
The recommended resolution to such a warning is to remove
configurations using the no commands.
Caution
(Optional) Replaces the contents of the running configuration with the
target configuration.
Committing a Configuration from Global Configuration Mode: Example, page 3-30
Committing a Configuration from Administration Configuration Mode: Example, page 3-30
This text comment appears in the commit entry displayed with the
show configuration commit list [detail] command.
The line argument is the text for the optional comment or label.
The comment option must appear at the end of the command line. If
multiple options are entered, all text after the comment option is
treated as a comment.
During the trial configuration, enter commit to confirm the
configuration. If you do not type the commit command, the router
reverts to the previous configuration when the trial time period
expires.
The confirmed option is not available in administration
configuration mode.
The line argument is the text for the optional comment or label.
The force option can cause the router to experience severe
problems if low-memory conditions occur. The force option
should be used only to remove configurations.
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
Managing Configuration Sessions
3-29