Troubleshooting - Digital Watchdog D4252 Series Instruction Manual

Hide thumbs Also See for D4252 Series:
Table of Contents

Advertisement

TROUBLESHOOTING

Before sending the camera out for repair, check the items below.
Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your
If the problem persists after checking these items, contact your
service center.
service center.
■ If no image appears
■ If no image appears
Is the coaxial cable attached securely?
Is the coaxial cable attached securely?
Is the power and voltage within operational specification?
Is the power and voltage within operational specification?
Has the iris of the lens been adjusted correctly (within specification
Has the iris of the lens been adjusted correctly (within specification
levels?
levels?
Is there adequate illumination?
Is there adequate illumination?
■ If the image is unclear
■ If the image is unclear
Is the lens in focus?
Is the lens in focus?
Is the lens dirty?
Is the lens dirty?
Dirt or fingerprints on the lens can adversely affect the
Dirt or fingerprints on the lens can adversely affect the
image. Gently wipe any dirt or fingerprints off the lens
image. Gently wipe any dirt or fingerprints off the lens
with a soft cloth or lens cleaning paper and cleaning
with a soft cloth or lens cleaning paper and cleaning
fluid (commercially available).
Is the monitor adjusted correctly?
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE

Advertisement

Table of Contents
loading

Table of Contents