Haier M1000 User Manual page 15

Or
O
Example n 2
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged and an alarm
will warn you when the battery reaches low. We
advise you keep the battery attached to the
phone, even when discharged: the backup
battery for the clock (inside the phone) will last
longer.
_ We recommend that you do not remove the
battery when the phone is switched on:
you may lose all your personal settings (see
information on battery safety).
1 Once the battery and battery cover are clipped
on the phone, plug the charger(supplied with
the phone, in the box) into the right hand socket
at the base of the phone as shown below.
2 Plug the transformer unit into a main AC power
socket with easy access. The # symbol indicates
the state of charge:
During charging the 4 charge indicators
change; Each bar represents 25% of charge.
When all 4 bars are steady the battery is
fully charged and you can disconnect the
charger.
When the battery is charged, remove the
connector by pressing the release button
on top of the connector.
_ Keeping the charger plugged to the mobile
when the battery is fully charged doesn't damage
the battery. The only way to turn off the charger
is to unplug it, so use an easily accessible AC
power socket. You can connect the charger to
an IT supply (Belgium only).
11