Phone Settings; Ringer Settings - Haier M1000 User Manual

your SIM card. It allows you to access the following
operations and information:
Show cost: to display the accumulative
cost of all dialed and received calls since
the last time you reset the cost meters;
Reset charge counter: to reset the cost
meter to zero (PIN2 code required);
Show balance: remaining call cost;
Show limit: the upper limit of call cost that
that has been preset;
Clear limit: to cancel the upper limit of call
cost that has been preset (PIN2 code
required); and
Set limit: to set an upper limit of call cost
(PIN2 code required).
If the upper limit of call cost is exceeded, "Call
cleared" is displayed. In this case, you cannot
place any call that is chargeable.
Charge rate(network-dependent)
You can check and change the charge rate.
The charge rate is stored in your SIM card in
decimal form.
Display rate: to display the current charge
rate.
Reset rate: to reset the charge rate upon
confirmation. PIN2 code required.
Set rate: to change the charge rate. PIN2
code required.

3.3 Phone settings

3.3.1 Ringer settings

Incoming call ringer
The phonebook in the phone is divided into six
groups. You can define different ring melodies
for each group so that you know which group
does the caller belong to.
49