Ac Voltage (Non-Sine Wave) Specifications - Fluke 5520A Operator's Manual

1-31. AC Voltage (Non-Sine Wave) Specifications

Triangle Wave &
Truncated Sine
Range, p-p [1]
0.01 Hz to 10 Hz
2.9 mV
to 93 V 10 Hz to 45 Hz
45 Hz to 1 kHz
1 kHz to 20 kHz
20 kHz to 100 kHz [3]
0.01 Hz to 10 Hz
93 mV
to 14 V 10 Hz to 45 Hz
45 Hz to 1 kHz
1 kHz to 10 kHz
[1] To convert p-p to rms for triangle wave, multiply the p-p value by 0.2886751. To convert p-p to rms for
truncated sine wave, multiply the p-p value by 0.2165063.
[2] Uncertainty is stated in p-p. Amplitude is verified using an rms-responding DMM.
[3] Uncertainty for Truncated Sine outputs is typical over this frequency band.
Square
wave Range
(p-p) [1]
Frequency
0.01 Hz to 10 Hz
2.9 mV 10 Hz to 45 Hz
to 45 Hz to 1 kHz
66 V 1 kHz to 20 kHz
20 kHz to 100 kHz
66 mV 0.01 Hz to 10 Hz
to 10 Hz to 45 Hz
14 V 45 Hz to 1 kHz
1 kHz to 10 kHz [3]
[1] To convert p-p to rms for square wave, multiply the p-p value by 0.5000000.
[2] Uncertainty is stated in p-p. Amplitude is verified using an rms-responding DMM.
Limited to 1 kHz for Auxiliary outputs ≥ 6.6 V p-p.
[3]
± (% of output + % of range) [2]
Frequency
Normal Channel (Single Output Mode)
5.0 + 0.5
0.25 + 0.5
0.25 + 0.25
0.5 + 0.25
5.0 + 0.5
Auxiliary Output (Dual Output Mode)
5.0 + 0.5
0.25 + 0.5
0.25 + 0.25
5.0 + 0.5
1-Year Absolute Uncertainty,
tcal ± 5 °C
± (% of output + % of range) [2]
Normal Channel (Single Output Mode)
5.0 + 0.5
0.25 + 0.5
0.25 + 0.25
0.5 + 0.25
5.0 + 0.5
Auxiliary Output (Dual Output Mode)
5.0 + 0.5
0.25 + 0.5
0.25 + 0.25
5.0 + 0.5
Introduction and Specifications
1-Year Absolute Uncertainty,
tcal ± 5 °C,
Two digits on each range
Six digits on each range
Two digits on each range
Six digits on each range
Additional Specifications
Max Voltage
Resolution
Two digits on
each range
Six digits on
each range
Two digits on
each range
Six digits on
each range
Max Voltage
Resolution
1
1-29