5520A Operators Manual; 5520A Operators Guide; 5520A Programmers Guide; 5520A Service Manual - Fluke 5520A Operator's Manual

5520A
Operators Manual
1-8.

5520A Operators Manual

This 5520A Operators Manual provides complete information for installing the 5520A
Calibrator and operating it from the front panel keys and in remote configurations. This
manual also provides a glossary of calibration, specifications, and error code
information. The Operators Manual includes the following topics:
•
•
•
•
•
•
•
•
1-9.

5520A Operators Guide

The 5520A Operators Guide contains a summary of operating instructions, and a front
panel and rear panel feature reference. This guide is included with this manual, and is
available in seven languages (listed on the previous page).

1-10. 5520A Programmers Guide

The 5520A Programmers Guide contains a summary of remote commands and reference
information useful in determining system status using the status byte and related
registers. This guide is included with this manual.

1-11. 5520A Service Manual

The 5520A Service Manual can be ordered through your local Fluke Sales or Service
representative (see "Service Information" in Chapter 2). The 5520A Service Manual
includes: theory of operation, performance testing, maintenance, and calibration
information.
1-8
Installation
Operating controls and features, including front panel operation
Remote operation (IEEE-488 bus or serial port remote control)
Serial port operation (printing, displaying, or transferring data, and setting up for
serial port remote control)
Operator maintenance, including verification procedures and calibration approach
for the 5520A
Oscilloscope calibration options
Accessories
The 5520A Operator Manual includes two pocket-sized booklets: one for front panel
operation and one for remote programming.