Wlan Card; Removing The Wlan Card - Dell OptiPlex 3000 Small Form Factor Service Manual

Steps
1. Insert the power button and its cable into the slot on the chassis.
2. Press the power button until it is seated on the slot on the chassis.
3. Connect the power-button cable to the connector on the system board.
Next steps
1. Install the disk-drive cage.
2. Install the 3.5-inch hard-drive.
3. Install the 2.5-inch hard-drive.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in

WLAN card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
6. Remove the disk-drive
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
44 Removing and installing components
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.