Table of Contents
Advertisement
About this task
The following images indicates the location of the side cover and provide a visual representation of the installation procedure.
Steps
1. Align the tabs on the side cover with the slots on the chassis.
2. Slide the side cover towards the front of the computer
3. Tighten the two thumb-screws to secure the side cover to the chassis.
Next steps
1. Follow the procedure in
Front bezel
Removing the front bezel
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
14
Removing and installing components
after working inside your
before working inside your
computer.
computer.
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 3000 Small Form Factor and is the answer not in the manual?
Questions and answers