Table of Contents
Advertisement
Steps
1. Align and place the bay-support bracket on the slot on the chassis.
2. Replace the two (#6-32) screws that secures the bay-support bracket to the chassis.
Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch
hard-drive.
3. Install the
2.5-inch
hard-drive.
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5-inch
4. Remove the
3.5-inch
5. Remove the
disk-drive
40
Removing and installing components
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Advertisement
Table of Contents
