Advertisement
2
First Use
2.1 To Open the Battery Door
Unlock the battery door by sliding the battery door toward the front of the
camera. The battery door will then flip open.
2.2 Installing the Battery
Insert the lithium-ion battery into the battery compartment with the metal
contacts facing the inside of the camera. The battery can only be inserted
one way.
Alternatively, the camera can be powered by 3 x AA batteries. Simply open
the battery door
2.3 Installing the Memory Card
Insert the included Micro SD memory card to record and store your videos
and photos. When the battery is low, media stored on the memory card will
not be erased. Please insert the SD memory card by following the steps
below:
1. Open the battery door by following the diagram above.
2. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click.
The memory card can only be inserted in one way. Do not force the
3. Close the battery door by pushing it down and sliding the lock back into
place.
card in if it will not go in smoothly.
12
Advertisement
