2. First Use
4. To remove the memory card, simply push in and the card will eject back
out.
NOTE:
Please format the memory card before using the camera (Caution,
this will erase all data on the card).
Do not remove or insert the memory card when recording. It may
damage the card or cause data loss.
Memory card rating must be Class 10 or above.
2.4 Charging the Battery
Connect your camera to the included AC adaptor with the USB cable
provided for charging. Open the USB port door on the side of the camera to
access the USB port. Insert the small end of the USB plug into the camera s
USB port, and the larger end in to the included AC adaptor. While charging
the camera, the LED status light will light up solid red, when finished charging
the light will turn off.
2.5 Powering the Camera On/Off
Tap the POWER button once to power the camera on. Tap the POWER
button again to turn the camera off.
If the camera
screen and it will automatically shut down within a few seconds to prevent
memory corruption or loss.
10