Shutting Down The Implement - Bush Hog CP Series Operator's Manual

13. Slide the jack stand down and away. (Figure Ops-2968)
14. Flip jack stand to the up-right position and place back in slot. (Figure Ops-2969)
15. Secure jack stand in the up-right position by reinserting the hairpin through the in hole.
16. Lower the cultipacker towards the ground.
17. Pull tractor forward and check depth of cultipacker
18. Once desired depth is reached, continue pulling 3-point culitpacker.
Please consult and follow your tractor's manual for proper and safe procedure on pulling
implements with operating.

10. Shutting Down the Implement

To shut down the implement, first bring the tractor to
a complete stop.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key,
before exiting the tractor.
CP Series Cultipacker 09/21
© 2021 Alamo Group Inc.
OPERATION
Operation Section 4-17