Xtreme Power Conversion NXTi 3P-3P User & Installation Manual page 21

NXTi 3P-3P User's Manual
08: Bypass mode setting
Interface
09: Battery backup time setting
Interface
10: Reserved
Interface
11: Reserved
Interface
Xtreme Power Conversion Corporation
Setting
Parameter 2:
OPN: Bypass allowed. When selected, UPS will run at Bypass mode
depending on bypass enabled/disabled setting.
FBD: Bypass not allowed. When selected, it's not allowed for run-
ning in Bypass mode under any situations.
Parameter 3:
ENA: Bypass enabled. When selected, Bypass mode is activated.
DIS: Bypass disabled. When selected, automatic bypass is accept-
able, but manual bypass is not allowed. Manual bypass means us-
ers manually operate UPS for Bypass mode. For example, pressing
OFF button in AC mode to turn into Bypass mode.
Setting
Parameter 3:
000~999: Set the maximum discharge time from 0 min to 999 min.
UPS will shut down to protect battery if the discharge time arrives
before the battery is under voltage. The default value is 990 min.
DIS: Disable battery discharge protection and backup time will de-
pend on battery capacity.
Setting
Reserve for future options.
Setting
Reserve for future options.
Uninterruptible Power Supply
Page 21