Table of Contents
Advertisement
10
Software Power-Off
Follow the steps below to use the ÒSoftware Power-Off
ControlÓ function in Windows 95/98 with ATX power
supply.
1.
Click the START button on the Windows 95/98 task
bar.
2.
Select Shut Down The Computer to turn off the
computer. The message ÒIt is now safe to turn off
your computer.Ó will not be shown when using this
function.
Modem Ring Power-On
While in Soft-off/Suspend state, if an external modem
ring-up signal occurs, the system wakes up and can be
remotely accessed. Make sure that the Ring Resume
From Soft Off option is set to Enabled in the BIOS setup
section (Refer to the Power Management section in
Chapter 3.)
Alarm Wake Up
If you want to autoboot the system at a certain time, set
the function of RTC Alarm time properly and the
function of RTC Alarm Resume From Soft Off option in
the BIOS Setup section will be set to Enabled.
Chapter 2
Advertisement
Table of Contents
