Introduction; Key Features - KTI Networks KC-351 Series Installation Manual

1. Introduction

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing
high-speed integration of fiber optic and twisted-pair segments. With 10BASE-T and 100BASE-TX
support, the converters provide seamless translation between Ethernet and Fast Ethernet networks. A
complete set of LEDs allows for quick status verification. Because of 802.3af compliance, the
converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mid-span injector in
addition to being powered by typical external power adapter. This feature makes the converter ideal for
remote areas of a network without AC power outlets.

1.1 Key Features


Convert speed and media type with full wire speed conversion

Support 10Mbps and 100Mbps speed on TP connections

Auto-negotiation and auto MDI/MDI-X detection function

Link fault pass through function

Provide manual configuration settings for TP port to support connection to non-auto-negotiation
devices

Transparent to 802.1Q VLAN tagged packets

Far End Fault function on FX port

Provide LED status display for remote TP port monitoring

Provide Loop Back Test function for installation diagnostics

Support wide range of fiber options on the FX port

Provide user-inaccessible settings for specific system applications

IEEE 802.3af compliant PoE PD (Powered Device) design

Low power consumption
5