Singer SG-2530C Instruction Manual page 9

3. Pilot light goes off when the required temperature is reached.
4. Wait for one more cycle; the Pilot light glows and goes off.
5. Turn the Temperature Control Dial to the minimum position.
6. Disconnect the iron from the mains supply outlet.
7. Hold the iron horizontally over a sink.
8. Press and hold the Self Clean button.
9. Steam and boiling hot water will drain from the holes on the
soleplate washing away the scale and minerals that have
built up inside the Steam Chamber.
10. Gently move the iron back and forth until the water tank is
empty.
11. When Self-Cleaning is complete, release the Self Clean
button.
12. Rest your steam iron vertically and allow to fully cool down.
13. Wipe the soleplate with a cold damp cloth.
Caution: Keep skin/body away from hot water.
HOW TO CLEAN THE STEAM IRON
1. Disconnect the iron from the mains supply outlet and wait to
cool down.
2. Use a damp cloth to remove any deposits on the soleplate
or the cabinets.
Note: Never use sharp or rough objects to remove the depos-
its from the soleplate. Never use any abrasive, vinegar or other
chemical agents to clean the iron.
9
ENGLISH