Singer SG-2530C Instruction Manual page 7

trol dial at the minimum/low heat setting.
• Insert the plug into the socket, and then turn the temperature
control dial to the "high heat" marking. The pilot light will come
on, indicating that the iron is heating up.
• When the pilot light turns off, the set temperature has been
reached and the iron is ready to use.
• During ironing, the pilot light on the iron automatically switches
on/off as the thermostat maintains the set temperature (you may
continue ironing during this process).
• Turn the steam control turning knob to the required position.
• Steam is produced as soon as the iron in held horizontally.
SPRAYING
Press the spray button to spray water on clothes, as often as
required.
Note: When using the water spray function, ensure that there is
enough water in the water tank, and you may have to pump the
spray button several times at fi rst time you use the iron in order to
start the spraying function.
BURST OR VERTICAL STEAM IRONING
• Press the burst of Steam button to generate a powerful burst of
steam that can penetrate the fabrics and smooth the most dif-
fi cult and tough creases. Wait for a few seconds before pressing
again.
• By pressing the Burst of Steam Button at intervals you can also
iron vertically (curtains, hung garments, etc.)
Note: The burst steam function can only be used at high tem-
perature. Stop the emission when the pilot light turns on and start
ironing again only after the pilot light has turned off.
7
ENGLISH