Table of Contents
Advertisement
2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage
methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps:
1. Enter Playback interface.
Menu>Playback
2. Select the Normal in the drop-down list on the top-left side.
3. Select a camera in the camera list.
4. Select a date in the calendar and click the
5. Click the
status bar to switch to the playback by smart search interface.
6. Set the rules and areas for smart search of line crossing detection, intrusion detection or motion detection
event triggered recording.
Full Screen Motion/Intrusion Detection
Click the
to set the full-screen full screen as the detection area.
Line Crossing Detection
Select the
button , and click on the image to specify the start point and end point of the line.
Intrusion Detection
Click the
button, and specify 4 points to set a quadrilateral region for intrusion detection. Only one
region can be set.
Network Video Recorder User Manual
Figure 6. 6 Setting Intrusion Detection on IP Camera
button on the left toolbar to play the video file.
Figure 6. 7 Playback by Smart Search
102
Advertisement
Table of Contents
