Table of Contents
Advertisement
2. Parameters Setting for Recording
1)
Select Record tab page to configure. You can configure the stream type, the resolution, and other
parameters on your demand.
Video Encode: select the video encoding to H.265 or H.264.
Enable H.264+ Mode: check the checkbox to enable. Once enabled, the Max. Bitrate Mode,
Max. Bitrate(Kbps) and Max. Bitrate Range Recommend are not configurable. Enabling it
helps to ensure the high video quality with a lowered bitrate.
The H.265 and H.264+ should be supported by the connected IP camera.
2)
Click the More Settings button to set the advanced parameters for recording and then click OK button
to finish editing.
•
Pre-record: The time you set to record before the scheduled time or event. For example, when an
alarm triggers the recording at 10:00, and if you set the pre-record time as 5 seconds, the camera
records at 9:59:55.
•
Post-record: The time you set to record after the event or the scheduled time. For example, when
Network Video Recorder User Manual
Figure 5. 3 Recording Parameters
Figure 5. 4 More Settings
76
Advertisement
Table of Contents
