Optional Framing Kit Installation Cb40Epv - Regency Fireplace Products City Series Owners & Installation Manual

installation

Optional Framing Kit Installation CB40EPV

Optional Extended and Compact Framing Kits
To watch the extended chase framing kit installation video click here: http://bit.ly/2uqaUTz
Tools/hardware needed are as follows:
- Level
- Stud finder
- Cordless screwdriver
- Phillips bit
- 5/16 inch (8 mm) hex head bit
- 2'' (51 mm) to 3'' (76 mm) wood screws
(minimum 16)
- Self tapping screws
- Circuit/receptacle tester
- Flashlight
Note: Extra screws are provided to assemble this kit.
2x
656-371
LEFT
RIGHT
LEFT
RIGHT
2x 656-339 (A)
3x 656-340 (B)
1x 656-384 (H)
1x 656-385 (S)
2x 656-353 (I)
2x 656-368 (J)
1x 656-360 (L)
2x 656-354 (M)
4x 656-351 (O)
2x 656-350 (P)
2x 656-355 (Q)
RIGHT SIDE
LEFT SIDE
Extended framing kit parts layout
Note: Wood/self tapping screws not provided
LEFT
RIGHT
2x 656-339 (A)
3x 656-358 (B)
1x 656-386 (H)
1x 656-387 (S)
2x 656-353 (I)
2x 656-368 (J)
1x 656-356 (L)
656-354 (M)
2x
4x 656-351 (O)
2x 656-350 (P)
2x 656-355 (Q)
RIGHT SIDE
LEFT SIDE
| City Series CB40EPV
36
Compact framing kit parts layout
Note: Wood/self tapping screws not provided
The following procedure shows the assembly of the extended framing kit—the
installation of the compact framing kit is identical except part 656-371 (Step 22)
is not required. Note: Unit nailing strips are not required (and can be recycled)
when using the framing kit.
1. Start with the unit away from the wall, install Part A (x2) to the back of the
unit with 2 screws on each side.
tooltip
Note the correct orientation of part A as there is a left and a right.
Framing Kit install video
See diagram below.
A
Part A Install
Orientation of Part A to Unit
Back
Top View
Front
Orientation to Unit
standoff
Screw Locations
CITY SERIES
standoff