Advice On Use - eLine QUBO FRAME Instructions Manual

EN
• If the quick release is not compatible with the bushings
of the stand, replace it with the one supplied (C).
• There are no individually usable components on the
inside.
• Since the feet are made from soft non-slip material,
during use they may leave rubber marks on the floor.
• Detach the unit from the stand before moving the home-
trainer to avoid risk of damaging the system.

ADVICE ON USE

• For less tyre wear and better grip on the roller, it is
advisable to use tyres of 23 mm width.
• Recommended rear wheel pressure: 7 -8 atmospheres
for racing tyres; 3.5 - 4 atmospheres for MTB tyres. For
particular cases, comply with the pressure recommended
by the tyre manufac- turer.
• For quieter use, better grip of the tyre on the roller and
reduced vibration, use slick tyres (also for Mountain bikes).
• Before use, clean the tyre with alcohol or water.
• If the pin of the quick release supplied protrudes more
than 3 mm from the fixing nut, cut off the protruding part
(Pic. 35).
11