Table of Contents
Advertisement
Disclaimer
Ground The
Instrument
DO NOT Operate
In An Explosive
Atmosphere
Keep Away From
Live Circuits
DO NOT Service
Or Adjust Alone
DO NOT
Substitute Parts
Or Modify
Instrument
2
Teledyne assumes no liability for the customer's
failure to comply with these requirements.
To avoid electric shock hazards, the instrument
chassis and cabinet must be connected to a safety
earth ground by the supplied power cable with
earth blade.
Do not operate the instrument in the presence of
inflammable gasses or fumes. Operation of any
electrical instrument in such an environment
constitutes a definite safety hazard.
Operating personnel must not remove instrument
covers. Component replacement and internal
adjustments must be made by qualified
maintenance personnel. Do not replace
components with the power cable connected.
Under certain conditions, dangerous voltages may
exist even with the power cable is removed. To
avoid injuries, always disconnect the power and
discharge the circuits before touching them.
Do not attempt internal service or adjustment
unless another person, capable of rendering first
aid and resuscitation, is present.
Because of the danger of introducing additional
hazards, do not install substitute parts or perform
unauthorized modifications to the instrument.
Return the instrument to a Teledyne authorized
service center for service and repair to ensure that
safety features are maintained.
Advertisement
Table of Contents
