Table of Contents
Advertisement
Selecting Modes for Designated Ar eas
Reference
The available modes for area editing depend on the area shape
For functions that cannot be used together in area editing,
More than one mode can be set for designated area, however, there are some limitations,
patterns of modes can be set together.
Note
Up to 20 groups of multiple areas can be edited. All the areas should belong to groups 1-20.
You can select up to seven job patterns for at most 20 groups. After you have set seven patterns, the copier will only
allow you to choose the pattern of a previous group.
If you change the settings for one group, it will change the settings for all other groups with the same job pattern.
However, if you have set a Paint, Color Background, or Frame/Line, changing the color in one group will not affect
other groups. (Up to 15 colors can be selected.)
The modes that can be set for inside areas as follows:
• Color/Image Adjustment: Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment, Color
• Color Creation:
Note
The editing functions available when specifying area with Frame/Line mode are Width and Color.
Color/Image Adjustment's default setting:
• Image Density - Manual Image Density
• Color Mode - Black & White
• Original Type - Text
You can change the default settings.
Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the
outlines might become uneven.
The way to set modes is basically the same as for the entire image. For details, refer to each page.
• To fill an area with a selected color, select the Paint.
• Image Density
see page 37.
• Original Type
see page 41.
• Color Adjustment
• Color Conversion
• Color Background
• Color Mode
see page 38.
• Image Adjustment
Area Shapes
Basic modes
1
Designate the areas you wish to modify.
Note
For designating areas,
2
Press the [Area Edit] key.
116
Selecting Modes for Designated Areas
Balance Adjustment
Color Conversion, Color Erase, Color Background Paint
see page 151.
see page 95.
see page 77.
see page 80.
see page 96.
see page 106.
see page 128.
see page 128.
• Color Balance Adjustment
• Color Erase
see page 79.
• Save Area
see page 118.
• Changing Job Settings for the Entire Image
see page 122.
• Changing Modes
• Adding Areas
see page 124.
• Erasing a Group
• Delete Area
see page 117.
see page 128. And up to 7
see page 92.
see page 123.
see page 126.
Advertisement
Table of Contents
