Area Shapes - Ricoh Aficio 6110 Operating Instructions Manual

Area Shapes

Rectangle
1
Set your original on the exposure glass.
2
Press the [Area Editing] key.
Note
(Rectangle) key is selected as default.
3
Mark the first point with the editor pen.
4
Mark the diagonally opposite corner of the area
you wish to select.
Note
When you make a mistake, press the [Erase] key.
Repeat 4 and 5 to add more rectangles.
When you continue to add areas, you can select other
shapes (except Closed Loop Multi-Closed Loop, Line,
Frame).
5
Press the [Confirm Selection] key.
6
Press the [Area Edit] key, specify your settings,
then press the [OK] key.
Reference
For details, see page 152.
7
Press the Start key.
Designating Areas
145