Table of Contents
Advertisement
7
Pull out the film strip holder with the base film.
8
Set the film in the holder.
Reference
Regarding setting the film,
9
While pressing the holder lever to the left, insert
the holder in the right slot.
0
Adjust the holder by sliding it up and down to
position the correct frame for copying.
!
If needed, adjust the color, density, or focus.
Reference
For details,
see page 192.
@
If needed, select the copier modes.
Reference
For details,
see page 195.
#
Press the Start key.
$
Choose your next job.
Reference
For details,
see page 196.
see page 182.
Selecting the Film Type and Performing Shading
2
1
TRSR0Z0E
TRSR0Y0E
TRSR0N0E
189
Advertisement
Table of Contents
