Table of Contents
Advertisement
User Tools
Menu
Tray Paper Size
Paper Tray Priority
Auto Tray Switching
Interleave Print
(Printer Option Required)
3 Side Full Bleed
156
Select the size of the copy paper set in the paper tray.
Note
If the specified paper size differs from the size of paper actually set in the paper tray, a
paper misfeed might occur because the paper size is not detected correctly.
Reference
For details,
see page 202.
You can select the paper tray which will be selected as a default in the following
conditions:
• When the main power switch or operation switch is turned on.
• When System Reset or Auto Reset mode is turned on.
• When the Clear Modes key is pressed.
• When the Auto Paper Select mode is not selected.
Note
Default: Tray 1
If you load paper of the same size in two or more trays, the machine automatically
shifts another tray when the tray in use runs out of paper. You can set or cancel this
setting.
Note
Default: Off
This function is not available in Area Editing Mode.
Turn this feature on to give print jobs priority.
If a print job comes along while another job is in progress, the current job will be
temporarly suspended while the print job is printed.
Note
Default: On
When this mode is off, narrow margins on all 4 sides of the original are not copied.
1: 2 ± 2mm / 0.08" ± 0.08"
2: 2 ± 2mm / -1.5mm, 0.08" + 0.08" / -0.06"
3: 2 ± 2mm, 0.08" ± 0.08"
4: 5 ± 2mm, 0.2" ± 0.08"
When you turn it on, margins 1, 2 and 3 are copied.
Note
Default: Off
You cannot cancel the leading edge margin (margin 4).
Description
Advertisement
Table of Contents
