35mm Slides Positive
1
Press the [Shading] key.
2
Open the film cover and insert the "P" (Posi-
tive) filter firmly in the left slot as shown in the
illustration.
Note
Be careful to insert the filter as shown, not the other
way around.
Before going to the next step, make sure that fresnel
lens is lowered in position.
3
Press the [Shading] key.
The machine will start shading automatically.
4
Set the film (slide or strip) in the holder.
Reference
Regarding setting the film,
5
While pressing the holder lever to the left, insert
the holder in the right slot.
6
Adjust the holder by sliding it up and down to
position the correct frame for copying.
see page 182.
Selecting the Film Type and Performing Shading
1: Filter
2
1
1
TRSR0F0E
TRSR0Y0E
TRSR0N0E
185