Table of Contents
Advertisement
Copying onto the reverse side of paper that has been already copied onto
Note
If you wish to copy 2 sided onto normal paper, use the Duplex feature.
Make sure that you set your original and the copy paper in the correct direction to achieve the results you require.
Original set on
Copy paper set in
the exposure glass
the bypass tray
C
B
A
B
A
You cannot use this function for OHP transparencies, translucent paper, adhesive labels and postcards.
Do not use copy paper that has been already copied on with other machines.
If the copy paper is curled, correct it before setting paper in the bypass tray. If the curl is not corrected, a paper misfeed
might occur.
see page 62.
Copies
GCMRYO2E
GCMRYO4E
GCMRYO1E
GCMRYO3E
Basic Operation
49
Advertisement
Table of Contents
