Table of Contents
Advertisement
Error
Error description
Code
E214
The quantity of work is full
E215
The bottom line has been
used up
E216
The file is too large
E217
No working file
E218
Waiting for the working
data
E219
Electrical fault, please
contact the manufacturer
E220
Wrong upgrade file
E221
Upgrade file type error
E222
Could not upgrade
E223
Upgrade file not the same
OEM manufacturer
E224
Head board can not be
connected 1.The connec-
tion
Fault Cause
Prompt when "Current Piece Count"
reaches "Total Piece Count" in pro-
cessing statistics
The "status used length" of the pro-
cessing statistics interface is greater
than or equal to "the total length of
the bottom line"
The number of stitches of the graph-
ics file exceeds the maximum range
1. Under the lock file, if the elec-
tronic label does not scan the
existing graphic name, press
Start
2. Screen and motherboard file
transfer failure
1. The file is too large, the moth-
erboard waits for the screen to
transfer files during processing
2. The screen cable has poor con-
tact or is disconnected.
3. The screen line is tied with a
strong interference source
4. The screen or motherboard pro-
gram is too old
5. The screen or motherboard hard-
ware is damaged
Motherboard hardware exception
1. The upgrade file is not suitable
for this system
2. The upgrade file is damaged
The upgrade file is corrupted or the
upgrade file is not suitable for this
system.
Motherboard hardware exception
Upgrade file version does not match
1. The connection between the
head board and the motherboard
is broken or the interface is
loose.
2. Headboard or motherboard hard-
ware failure
– 55 –
Solution
1. The current value of redesigned parts
or the total number of piece counts
2. If you don't need to count statistics,
you can turn off the piece counting
function in "Statistics Settings"
1. Need to change the bobbin hook and
reset the corresponding total bobbin
length.
2. If you do not need to use the bottom
line statistics, you can turn off this
function in the "statistics settings"
Need to replace small graphics files
1. Need to re scan or switch graphics
files
2. Check the screen cable and upgrade
the motherboard and screen program
1. Need to wait for a while to disappear
automatically
2. Check the screen line
3. Separate screen wires from strong in-
terference wires such as motor power
wires
4 Upgrade the latest screen or mother-
board program
5. Test whether you can upgrade the
motherboard program; test whether
the communication is normal in the
"Test Transmission" interface, and
replace the hardware if it is abnormal
Contact equipment manufacturer
1. Use the corresponding upgrade file,
such as BP01 system can only up-
grade BP01 program
2. Confirm whether the upgrade file in
the USB flash drive is damaged
Need to select the corresponding type of
upgrade file for upgrade
Contact equipment manufacturer
The system is not the corresponding
legal upgrade file
1. Check the cable of the head board
2. Replace the headboard or mother-
board
Advertisement
Table of Contents
