(2) Attaching the templates
A
A
❶
❶
❶
❶
– 32 –
Machine the upper and lower templates based on
the design.
1) Place the upper template on the lower template
in such a way that the sewing slits A of the upper
and lower templates are aligned and overlap with
each other as shown in the figure. Apply the tem-
plate-specific tape (36 mm wide) to portion ❶ as
shown in the figure.
2) To produce more beautiful seams, it is recom-
mended to firmly secure the material at the cor-
rect position by affixing sand tape, double-sided
adhesive tape, etc. on the slits of the upper and
lower templates or put positioning pins at appro-
priate locations in order to prevent the material
slippage.