The following figure gives an overview of the hardware components tested during the series of
Equipment Check tests.
Preamp 5
FIGURE 13: Equipment Check - Overview
The following lists each step in the Equipment Check and identifies which device is
involved in the testing:
•
DSP Box Test – DSP Box and Panel PC
•
Cable Connections – ATA 5 and Preamp 5
•
Calibration Date – ATA 5
•
Artifact Test – DSP Box and Preamp 5
•
Acoustic Test – ATA 5
•
Impedance Test – PCA 5
2.4.2. Component tests
2.4.2.1.
General
The Service Menu allows performing the following tests in non-screening mode:
•
Print a test page on Page printer
•
Print a test page on Label printer
•
Scan a Bar code and view result
20
DSP Box
ATA 5 Cable
Equipment
Check Kit
PCA 5 Cable
ALGO® 5 Newborn Hearing Screener Service Manual
P/N 000976 Rev.A