Toro 132-9543 Installation Instructions Manual page 7

Removing the Console Assembly
Set aside all of the items that you remove from this procedure.
1. Remove the 2 carriage bolts and flange nuts that secure
the console assembly to the console bracket
Figure 14
1. Console assembly
2. Flange nut
Note: Diesel powered machines have a spacer
between the console assembly and bracket.
2. Remove 2 flange nuts securing the armrest from the
console assembly (Figure
(Figure
3. Arm rest
4. Carriage bolt
14).
Installing the Kit
Installing the Console Assembly
14).
1. Install the upper and lower decal to the console
assembly (Figure
1. Console assembly
2. Lower decal
2. Use the 2 carriage bolts and flange nuts that you
removed earlier to secure the console bracket
16).
Note: Install the spacer on machines that are diesel
powered.
1. Console assembly
2. Flange nut
3. Arm rest
3. Use the 2 flange nuts you removed earlier to secure the
armrest to the console assembly
7
15).
Figure 15
3. Upper decal
Figure 16
4. Spacer (diesel only)
5. Carriage bolt
(Figure 16).
(Figure