Bolt (#10 X 3/8 Inch) - Toro 132-9543 Installation Instructions Manual

Figure 28
1. Display
4. Use the retaining nut you removed earlier to secure the
ignition switch to the console assembly
Figure 29
1. Retaining nut
5. Connect the wire harness to the appropriate
connections (Figure
Figure 30
1. Control, indicator, or
switch
2. Retaining ring
(Figure
2. Start switch
30).
2. Connector
Completing the Install
1. Use the 8 bolts that you removed earlier to secure the
console cover to the console assembly
29).
1. Bolt (10 x 1/2 inch)
2. Connect the battery: Refer to the Operator's Manual.
3. Verify the function of the controls and adjust if
necessary.
11
(Figure
Figure 31
2. Console cover
31).