Toro After Groundsmaster 4500-D Operator's Manual page 5

Removing the Roll Bar Top Bolts
Important:
Use an assistant to support the roll
bar when you remove the bolts securing it to the
machine.
1. Remove and retain the bolt securing the storage
compartment located on the left side of the
machine (Figure
1. Bolt
2. Remove and retain the storage compartment.
3. Remove and retain the 2 bolts, reinforcement
plate, and 2 flange nuts securing the roll bar to
the top of the frame
1. Bolt
2. Roll bar
4. Remove and retain the screw securing the
reinforcement plate and the bolt securing the
battery compartment
3).
Figure 3
2. Storage compartment
(Figure 4).
Figure 4
3. Reinforcement plate
4. Flange nut
(Figure 5).
1. Screw
5. Remove and retain the bolt and the
battery-compartment clamp
g030642
1. Battery-compartment clamp
2. Bolt
6. Arrange the reinforcement plate and battery
compartment to allow you to remove the 2 bolts,
reinforcement plate, and 2 flange nuts that
secure the roll bar to the top of the frame
7). Set them aside.
g030899
5
Figure 5
2. Bolt
(Figure 6).
Figure 6
g030670
g030672
(Figure