1. Close the rear window.
1. Move the steering column
to the forward position.
2. Raise the seat to
maximum height.
3. Move the seat forward.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
130-5355
2. Raise the hood.
132-3253
4. Lower the seat back.
5. Tilt the seat sideways.
Description
No parts required
Left, front mount
Right, front mount
Left, rear mount
Right, rear mount
Rubber isolator
Left, front foam seal
Center, front foam seal
Right, front foam seal
Left foam seal
Right foam seal
Left tank foam
Right tank foam
Left, rear foam seal
Right, rear foam seal
Rear foam seal
decal130-5355
1. Warning—1) Remove the pin; 2) Raise the windows; 3)
Exit the cab.
decal132-3253
Qty.
–
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
2
130-0611
Use
Prepare the machine before you install
the cab unit.
Prepare the cab mounting hardware.
Apply the foam seals to the mount and
frame.
decal130-0611