4.
Use the bolt (5/16 x 1-1/2 inches) to secure the
storage compartment to the machine
22).
1. Bolt (5/16 x 1-1/2 inches)
5.
Use the screw to secure the reinforcement plate
to the machine and use the bolt (1/2 x 1 inch) to
secure the battery-compartment clamp and the
battery compartment to the machine
1. Screw
2. Battery compartment
Installing the Wire Harness and
Preparing the Cab for Installation
Route the wire harness from underneath the machine
up to the battery box as shown in
(Figure
Figure 22
2. Storage compartment
(Figure
Figure 23
3. Battery-compartment
clamp
4. Bolt (1/2 x 1 inch)
Figure
24.
Install the wire harness as shown in
g030718
23).
Use the measurements in
into the cab.
g030719
1. 1.93 inches
2. Hole (0.31 inch diameter)
3. 3.36 inches
11
Figure 24
Figure
25.
Figure 25
Figure 26
and drill holes
Figure 26
4. 3.87 inches
5. Hole (0.31 inch diameter)
6. 2.29 inches
g033196
g385502
g032999