bottle and R-clamp to the tank mount
44).
Figure 44
1. Tank mount
2. Flange nut (5/16 inch)
3. Washer bottle
4.
Install the swell-latch assembly to the tank
mount
(Figure
45).
Figure 45
1. Swell latch
2. Swell-latch bushing
5.
Insert the tab into the slot and the swell-latch
bushing into the hole in the tank plate
46).
(Figure
g030732
4. R-clamp
5. Carriage bolt (5/16 x 3/4
inch)
g030919
3. Swell-latch nut
(Figure
1. Swell latch
6.
Flip the swell-latch lever down
Note:
The swell latch should hold the tank
mount firmly to the tank plate. Adjust the nut to
change the pressure applied by the swell latch.
Connecting the Washer Hose
1.
Route the washer hose through the hose ring on
the rear cab mount
1. Hose ring
2.
Route the washer hose through the R-clamp
and connect it to the washer bottle
18
Figure 46
2. Tank mount
(Figure
46).
(Figure
47).
Figure 47
2. Washer hose
(Figure
g030920
g030762
48).