Figure 50
1. Connector from the machine
2. Connector from the cab
3.
Connect the wire from the air-conditioner
compressor to the bullet connector on the wire
harness
(Figure
51).
Figure 51
1. Compressor wire
2. Bullet connector
4.
Route the wire harness for the washer bottle
through the R-clamp and connect it to the bottle
(Figure
52).
g030779
g030788
3. Wire harness
1. Wire harness connector
5.
Use cable ties to secure the wire harness to the
hydraulic hoses and hard lines at the locations
shown in
Figure 53
1. Wire harness
20
Figure 52
2. Washer bottle connection
and
Figure
54.
Figure 53
2. Cable tie
g030777
g030778