Log Manager (Available In Golden Series) - U-Reach Intelligent 9 Series User Manual

8.7 Set Data Pattern
Sets the Burn-In test writing value. There are two data patterns:
Auto Pattern: The default value will be used during burn-in test. Default value is
⚫
random repetition of FF and 00.
User Defined: Users can manually indicate which value to use during burn-in test. The
⚫
setting is only 1 byte.
Note
"Data Pattern" setting is only available in [8.2 Burn-In (Auto Data)].
8.8 Compare Count Per Loop
Sets the compare count in each loop during Auto Data burn-in test. The default setting is
one compare (reading) test per loop.
"Compare Count Per Loop" setting is only available in [8.2 Burn-In (Auto
Note
Data)].
8.9 Power Off Between Loop
Sets the power off time range between loops. This can be set from 0 to 15 seconds.
8.10 Compare Count Per Copy
Sets the compare count in each loop during Copy & Compare burn-in test. The default
setting is one compare (reading) test per loop.
Note
Can only be set in [8.1 Burn-In (Copy+Compare)].

9. Log Manager (Available in Golden Series)

The Log Report Management Tool assists users with monitoring, recording and managing
the entire duplication process. By displaying detailed information for each port, this tool
helps to identify the slowest writing device that in turn, keeps the operation running
efficiently. Please refer to
"How to Use Event Log?"(P.34) for details.
31