Yamaha DRIVE 2 2022 Owner's/Operator's Manual page 49

MAINTENANCE AND ADJUSTMENT
3
1. Transmission oil filler bolt
2. O-ring
3. Transmission oil
4. Correct oil level
6. Check the O-rings for damage, and replace them
if necessary.
7. Install the transmission oil drain bolt and its
O-ring, and then tighten the bolt to the specified
torque.
2 1
Transmission oil drain bolt tightening torque:
4.3 N·m (0.43 kgf·m, 3.1 lb·ft)
4
8. Refill the transmission case with the recom-
mended oil.
Allow excess transmission oil to flow out of the
hole until it stops.
Recommended oil brand:
Available viscosity index:
SAE 80W-90 or SAE 90
Transmission oil change quantity:
475 cc (475 mL, 0.50 US qt)
9. Install the transmission oil filler bolt and its
O-ring, and then tighten the bolt to the specified
torque.
Transmission oil filler bolt tightening torque:
4.3 N·m (0.43 kgf·m, 3.1 lb·ft)
10. Install the transmission cover and secure with
four bolts, and then install the rear floor cover
and secure with two bolts.
44
1
2
3
4
5
6
7
8
9
10
11
12
13
14