Yamaha DRIVE 2 2022 Owner's/Operator's Manual page 41

MAINTENANCE AND ADJUSTMENT
WARNING
Visually and manually inspect to verify that the DC
output cord, plug and battery charging receptacle
are in good working condition before each and ev-
ery use. Do not use the charger under any of the
following conditions:
• The DC charging receptacle does not grip the
DC output plug tightly, is loose or does not
make a good electrical connection.
• The DC output plug or charging receptacle feels
hotter than normal.
• The DC output plug or charging receptacle con-
tacts are bent, corroded, or are dark or bluish in
appearance.
• The DC output plug, cords, receptacle or equip-
ment-charging wiring are cut, worn, broken or
have any exposed conductors.
• The DC output plug, cords, charger or recepta-
cles are damaged or distressed in any way.
Using the charger with any of the above symptoms
could result in a fire, property damage or personal
injury.
WARNING
Do not disconnect the DC output plug from the DC
charger receptacle when the charger is on. If the
charger must be stopped, first disconnect the AC
power supply cord from its AC outlet, and then dis-
connect the charger DC output plug from the DC
charger receptacle.
WARNING
Whenever disconnecting a AC or DC cord set plug
from receptacle, pull from the plug body and not
from their respective cords.
The instructions printed on the charger (shown below)
are for daily reference. The charger is factory preset
for use with Yamaha Lithium-ion golf car battery.
36
1
2
3
4
5
6
7
8
9
10
11
12
13
14