Yamaha DRIVE 2 2022 Owner's/Operator's Manual page 23

Personal transport vehicle
Table of Contents

Advertisement

1
1. Parking brake pedal
1
1. Tow switch
OFF
ON
PARKING BRAKE PEDAL
Press down on the parking brake pedal whenever
parking the PTV.
TIP
Release the parking brake by depressing the acceler-
ator pedal.
WARNING
The parking brake will automatically release when
the accelerator pedal is depressed. If the main
switch is in the "ON" position, depressing the ac-
celerator may suddenly cause the PTV to move.
TOW SWITCH
Before operating the car, make sure the tow switch is
in the "RUN" position.
NOTICE
Ensure that the "Drive Select Switch" is in the
"FWD" position and then move the "TOW Switch"
to "TOW" before towing.
After moving switch from "RUN" to "TOW," wait 15
seconds minimum before switching again.
Failure to do so may lead to drive system damage
while towing.
TIP
If move the TOW switch from RUN to TOW while the
main key is ON, the buzzer will sound.
HEADLIGHT/TAILLIGHT ON POSITION
Turn the main switch all the way to the right to the
second ON position. This will activate the headlights
and taillights.
Li-ion BATTERY
18
CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents