Yamaha DRIVE 2 2022 Owner's/Operator's Manual page 38

MAINTENANCE AND ADJUSTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
INSTALLATION
WARNING
RISK OF FIRE - Use this charger only on circuits
with a 15-amp or higher branch circuit protection
(circuit breaker or fuse) in accordance with the na-
tional electrical code, ANSI/NFPA 70 and all appli-
cable local codes and ordinances.
When using an extension cord, use only a ground-
ed, 3-wire, 12-AWG cord no longer than 15 m
(50 ft.). The use of an improper extension cord
could result in a risk of a fire or electric shock.
WARNING
The output of chargers with greater than 48 volts
may pose an energy and/or shock hazard under
normal use.
NOTICE
AVOID connecting a charger and another device to
a single 15A/20A circuit or the circuit may become
overloaded.
The AC line connected to the charger must be capa-
ble of supplying 12 Amperes to the charger.
Also, maximum Ampere varies depending on AC volt-
age. Please refer to "AC Input" in General Specifica-
tions.
33