Yamaha DRIVE 2 2022 Owner's/Operator's Manual page 40

MAINTENANCE AND ADJUSTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
GROUNDING
The battery charger must be grounded to reduce the
risk of electric shock. The charger is equipped with a
3-prong AC cord set. The AC cord set must be con-
nected to an appropriate receptacle that is properly
installed and grounded in accordance with the Nation-
al Electrical Code and all local codes and ordinances.
WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of an electric shock.
The conductor with insulation that has an outer sur-
face that is green, with or without yellow stripe(s), is
the equipment-grounding conductor. If repair or re-
placement of the charger's AC cord set is necessary,
do not connect the equipment-grounding connector
to a live terminal.
CHARGING
WARNING
To reduce the risk of an electric shock, connect
only to a properly grounded, single-phase (3-wire)
outlet. Also, refer to grounding instructions.
WARNING
Risk of electric shock! Do not touch any uninsu-
lated parts of the charger output plug, DC charger
receptacle or battery terminals.
WARNING
Surfaces may be hot. To avoid risk of burns, do not
touch.
NOTICE
Charge only Yamaha Lithium-ion battery systems
manufactured by RoyPow Technology Co., Ltd.
Damage to the charger and batteries may result
if this charger is used on the wrong battery type.
35