Table of Contents
Advertisement
MCAC-UTSM-201406
3) Set the operating mode
Press the mode button
mode will circle as follow:
4) Fan speed setting
Under COOL, HEAT and FAN modes, press the fan speed button
setting.
After each fan speed button press will circle as follow:
Notes: Under AUTO and DRY modes the fan speed is not adjustable and the default fan speed is auto.
5) Temperature setting
Under AUTO, COOL, DRY, HEAT modes, press the temperature setting buttons
to set the temperature, the adjusting range is 17º C~30 º C (or 62 º F~88 º F).
Notes: The setting temperature cannot be adjusted under fan mode.
6) Timer on and timer off setting
Press the timer/clock setting button
will display
Press the buttons
each press
than 10 hours, each press
setting is 24 hours.
After finish adjusting the timer on setting, press the button
confirm and exit the timer on setting.
Midea R410A Full DC Inverter Split Type Series Technical Manual
to set the operating mode, after each button press the operating
and
.
and
to adjust the timer. If the timer setting is less than 10 hours,
or
will increase or decrease 0.5 hour. When the timer setting is more
or
, then enter into the timer on setting status, and screen
will increase or decrease 1 hour, the maximum timer
can adjust the fan speed
and
or wait for 5 seconds to
80
Advertisement
Chapters
Table of Contents
