Table of Contents
Advertisement
1
Automatic
2
White
3
Green
4
Blue
5
Green+Blue
6
Red+Green
7
Red+Blue
8
Mode A: Blue+ Gradual Red
In case of replacement of an old LED-CP100 / TP100 / P100 Auto-Color light by a new LED-CP100
RGB model (15 preset programs), please note:
1) All the lights can be synchronized in "Automatic color change" mode that is pre-installed on the new LED-
CP100 / TP100 / P100 RGB lights as a Program 1.
Synchronization instructions: Turn off / turn on the light every 2 seconds to select a Program 1 on the LED-
CP100 / TP100 / P100 RGB. it stays on. It takes 10 seconds to get fixed the Program (color). From then on, all
the lights will be synchronized, and the color will be changed automatically.
2) To use all 15 preset programs, all the old LED-CP100 / TP100 / P100 Auto-Color lights must be replaced with
new LED-CP100 / TP100 / P100 RGB version.
4. INSTALLATION NOTES
1. It is recommended to install a light every 20
2. The lights should be installed in the direction that they will not shine directly into the house.
3. For training or competition pools, the lights must be installed on the sides in order to prevent swimmers from
seeing any glare.
4. Nothing should be placed on the pool side directly above the lights for ease of future maintenance.
5. The cables connecting the lights and the transformers must be at least 6mm² and the distance between them
must not exceed 30m; otherwise the lights will not function properly.
6. Terminal blocks must meet the IEC60988-2-1 standard having the rated connecting capacity of 4,0mm² use of
screw-type terminal at least 25A current rating, mounted on junction boxes inside.
Transformer
=30m
9
Mode B: Green+Gradual Red
10
Mode C: Blue+Gradual Green
11
Mode D: Blue+Gradual Red
12
Mode E: RGB Colour Sequence: Red>Green>Blue
13
Auto Colour Change
14
Mode F: Four Colour Sequence: Red>Green>Blue>Purple
15
Rapid Auto Colour Change
m²
, the approximate exposure area of each unit.
Light
/ TP100 / P100
INSTALLATION NOTES
P4
Advertisement
Table of Contents
