Table of Contents
Advertisement
Figure 11: An example of network connections for one shared network
1
Host/server
2
Ethernet switch 1
3
Ethernet switch 2
4
Array
5
Data port eth3a on controller A
6 Management port eth0a on controller A
Two Dedicated Networks
Two Dedicated Networks
In this configuration:
•
Management and data paths are on different subnets or networks
•
Ports eth0a handle management traffic
•
Ports in slot 1 (eth1 ports) through slot 6 (eth6 ports) handle data traffic
In the following example, the eth0a port on each controller provides the management path (red cables). The eth3a port on
each controller provides the data path (blue cables). The management and data ports connect to different network switches.
The host also connects to both switches. The separated management and data paths on this network provide higher performance
and high availability.
Note that only one management connection and one data connection are shown. You can add more connections and use
different ports as needed.
7
Data port eth3a on controller B
8
Management port eth0a on controller B
9
Host network connection
10
Management interface pair
11
Data interface pair
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 29
Advertisement
Table of Contents
