E70354 E70372
15 cm
Step 4:
Lay flat cables
8
Step 5:
Replace device
8
u Lay flat cables; straight for a minimum of 15 cm.
u If necessary, use the optional AS-i clips (6) (→
Accessories).
u Provide all outgoing cables (AS-i flat cables and
M12 cable) with a suitable strain relief max. 1 m
behind the cable entry. With every additional
metre, install another strain relief.
6
Note on replacement:
Precisely use the pierced points of the AS-i flat cable
(7) or at least position within the black seal (8) of the
device.
7
AS-i flat cable splitter