1 Preliminary note ► Instruction > Reaction, result Important note Non-compliance can result in malfunction or interference� Information Supplementary note� 2 Safety instructions • Please read the operating instructions prior to set-up of the device� Ensure that the product is suitable for your application without any restrictions� •...
4 Installation ► Disconnect the system from power before installation� ► For installation choose a flat mounting surface� The entire bottom of the module must lie flat on the mounting surface� ► Screw the lower part onto the mounting surface using M4 screws and washers (1)�...
Page 5
ye (AS-i) bk (AUX) 1: M4 screws and washers (not supplied with the device)� Tightening torque 1�8 Nm� 2: M3�5 screws supplied� Tightening torque 1�2���1�4 Nm� 3: Functional earth springs 4: M4 / M5 screws and washers (not supplied with the device)� Tightening torque max�...
5 Electrical connection The unit must be connected by a qualified electrician� The national and international regulations for the installation of electrical equipment must be adhered to� Intended for connection to class 2 (cULus class 2) circuits only� ► Disconnect power� ►...
After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations� 9 Technical data Technical data and further information at www�ifm�com� 10 Scale drawing M12x1 28,5...