1 Preliminary note Technical data, approvals, accessories and further information at www.ifm.com. 1.1 Symbols used ► Instructions → Cross-reference Important note Non-compliance may result in malfunction or interference. Information Supplementary note. 2 Safety instructions • Read this document before setting up the product and keep it during the entire service life.
4 Installation ► Disconnect power before installation. ► Remove protective cap for M12 socket when the plug is connected (→ Step 3). ► Choose a plane mounting surface. ► Fix the lower part to the mounting AS-i surface at the mounting holes (1). Step 1: Install lower part ►...
Page 4
15 cm ► If necessary, use AS-i clips (6). AS-i clips are not supplied with the unit. Information at www.ifm.com → Data sheet E70354 → Accessories. Step 4: Lay flat cable ► Note on replacement: Precisely use the pierced points of the...
5 Electrical connection The unit must be connected by a qualified electrician. ► Disconnect power. ► Connect the unit as follows: Connection AS-i + AS-i - + 24 V not connected...